Tracker 2WD L4-2.0L VIN C (1999)
1. Install a new fuel sender assembly gasket (2).
2. Install the fuel sender assembly (1) into the fuel tank.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Secure the fuel sender assembly (1) with the six bolts (3).
Tighten
Tighten the fuel sender assembly bolts to 5 N.m (60 lb in).
4. Reconnect the return fuel line (1) to the fuel sender assembly.
5. Reconnect the fuel supply line (2) to the fuel sender assembly.
6. Reconnect the electrical connector (4) to the fuel sender assembly.
7. Install the fuel tank.
8. Inspect for any fuel leaks. Repair as necessary.