Tracker 2WD L4-2.0L VIN C (1999)
Idle Air Control Motor (IAC): Service and Repair
IAC Valve Replacement
REMOVAL PROCEDURE
1. Remove the IAC valve electrical connector.
2. Remove both attaching bolts (3).
3. Remove the IAC valve (2).
INSTALLATION PROCEDURE
1. Install a new O-ring (4).
2. Install the IAC valve (2).
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Tighten both attaching bolts (3).
Tighten
Tighten the bolts to 3.5 N.m (30 lb in).
4. Reconnect electrical connector.
