Tracker 2WD L4-2.0L VIN C (1999)
3. Connect the A/T throttle cable (2) to the throttle lever (3) if necessary.
4. Connect the accelerator control cable (1) to the throttle lever (3).
5. Adjust the accelerator control cable as necessary. Refer to Accelerator Cable Adjustment.
6. Adjust the A/T throttle cable if necessary. Refer to TV Cable Adjustment in Automatic Transmission.
7. Connect the lower coolant hose (1) to the throttle body.
8. Connect the upper coolant hose (2) to the throttle body.
9. Connect the IAC valve electrical connector (2).
10. Connect the TP sensor electrical connector (3).
11. Connect the breather hose (1) to the throttle body.
12. Install the intake air inlet duct to the throttle body.
