Tracker 2WD L4-2.0L VIN C (1999)
Throttle Cable/Linkage: Adjustments
Accelerator Cable Adjustment
1. With the throttle valve closed, inspect the accelerator pedal free play (1). The accelerator pedal free play clearance should be 2-7 mm (0.08-0.27
in).
2. Loosen the accelerator cable locknut (2) at the throttle body bracket.
3. Turn the accelerator cable adjusting nut (1) in order to obtain the specified accelerator pedal free play.
4. Repeat steps 1 thru 3 until the accelerator pedal free play is within the specified value.
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Install the accelerator cable locknut (2).
Tighten
Tighten the accelerator cable locknut to 23 N.m (17 lb ft).