Tracker 2WD L4-2.0L VIN C (1999)
14. The PROGRAM CONTROLLER/PROGRAMMING COMPLETE screen will appear when the programming is complete Click on CLOSE.
15. Turn OFF the ignition for 30 seconds to reset the PCM.
16. Start the vehicle and let the vehicle idle for two minutes while observing the operation of the vehicle.
17. If the vehicle is operating normally, the programming is complete. Clear any and all trouble codes from all the modules in the vehicle.
18. If the vehicle will not start or does not idle normally, re-do the PCM REPROGRAMMING PASS THRU PROCEDURE.
WARRANTY INFORMATION
For vehicles repaired under warranty, use the illustration shown.
Disclaimer
