Tracker 2WD L4-2.0L VIN C (1999)
NOTICE: Refer to Fastener Notice in Service Precautions.
12. Install the brake shield (1) to the spindle.
13. Install the 4 bolts to the brake shield.
-
Tighten the bolts to 50 Nm (36.5 ft. lbs.).
14. Install the wheel hub, the bearings, and the seals.
15. Install the brake rotor.
16. Install the tire and wheel assembly.
17. Lower the vehicle.
18. Measure the wheel alignment. Adjust the alignment if necessary.
