Tracker 2WD L4-2.0L VIN C (1999)
IMPORTANT: Verify that the steering wheel and the front tires and wheels are in a straight ahead position.
5. Install the 2 insulators to the steering gear (3).
6. Install the steering gear to the vehicle. Secure the steering gear to the vehicle with the 2 brackets and 4 bolts (1). DO NOT tighten the bolts.
7. In order to set the rack in the straight ahead position, align the match mark (2) on the pinion shaft with the match mark (4) on the steering gear
housing.
NOTICE: Refer to Fastener Notice in Service Precautions.
8. Connect the lower steering shaft to the steering gear. Install the intermediate steering shaft clamp bolt (2).
-
Tighten the bolt to 25 Nm (18.0 ft. lbs.).
