Tracker 2WD L4-2.0L VIN C (1999)
Stabilizer Bushing: Service and Repair
REMOVAL PROCEDURE
1. Using paint, place match marks (3) on the stabilizer shaft next to the insulators (2).
2. Remove the 2 stabilizer shaft insulator bracket bolts (7) and the bracket (6).
3. Remove the stabilizer shaft insulator.
INSTALLATION PROCEDURE
IMPORTANT: For correct installation of the stabilizer shaft, align the paint match marks (3) on the stabilizer shaft with the stabilizer shaft insulators
(2).
1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.