Tracker 2WD L4-2.0L VIN C (1999)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front Coil Spring Replacement
REMOVAL PROCEDURE
-
Tool Required
-
J 24319-B Universal Steering Linkage Puller.
1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
CAUTION: To prevent personal injury and or component damage, use the proper tools to support the lower control arm when removing
the coil spring. The coil spring is under extreme pressure and can become a projectile should the spring separate from the lower control
arm before all of the tension is relieved.
3. Support the lower control arm (11) with a jack.
4. Remove the ball stud nut (2).
5. Use the J 24319-B in order to separate the lower control arm ball stud (5) from the knuckle (1).
6. Remove the following components in order to separate the stabilizer shaft link from the lower control arm:
-
The stabilizer shaft nut (1)
-
The washer (2)
-
The bushing (3)