Tracker 2WD L4-2.0L VIN C (1999)
2. Install the clutch actuator cylinder to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch actuator cylinder bolts (1).
^
Tighten the clutch actuator cylinder bolts to 16 Nm (11.5 ft. lbs.).
4. Install the clutch actuator cylinder fluid line (2) to the clutch actuator cylinder (1).
5. Install the clutch actuator cylinder hose bolt
^
Tighten the clutch actuator cylinder line bolts to 23 Nm (17 ft. lbs.).
6. Bleed the hydraulic clutch system. Refer to Hydraulic Clutch Bleeding.
