Tracker 2WD L4-2.0L VIN C (1999)
Fluid - M/T: Service and Repair
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan or suitable container underneath transmission.
3. Remove transmission oil level/filler plug from transmission (2 Wheel Drive Models) (2).
4. Remove the transmission oil level/filler plug from the transmission 4 Wheel Drive Models (3).
5. Remove transmission drain plug from transmission and drain transmission oil (2 Wheel Drive Models) (3).
6. Apply GM P/N 12346004, or equivalent, to the threaded portion of the transmission drain plug (3).
Notice: Refer to Fastener Notice in Service Precautions.
7. Install transmission drain plug (3) into the transmission (2 Wheel Drive Models).
^
Tighten the transmission drain plug to 28 Nm (20 ft. lbs.).