chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Synchronizer Hub: > < M/T - 4-3 Downshift/1-2 Upshift Gear Clash
Page 2
background image

^

The 1st and 2nd gear synchronizer hub and sleeve, P/N 96068498

^

The 1st and 2nd gear synchronizer hub inserts (3 required), P/N 96066873

Replacing each of the synchronizer springs requires the disassembly of the transmission mainshaft gears in order to access the 1-2 synchronizer.

Refer to the Manual Transmission - M59 (Tracker) sub-section of the 2000 GM Transmissions Unit Repair Manual (TURM) for transmission
disassembly/assembly procedures.

Parts Information

Important:
^

Use the new synchronizer springs provided with kit P/N 91176347. Do NOT use the synchronizer springs, P/N's 91174260, 91174261, and
91175908 currently listed in the GMSPO catalog. These springs do not adequately prevent the gear clash condition.

^

Use Synchromesh Transmission Fluid, P/N 12345349, when refilling the transmission. Do NOT use GM Goodwrench(R) Synthetic Manual
Transmission fluid, P/N 12346190, listed in the Service/Owner's Manual. This fluid does not adequately prevent the gear clash condition.

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use:

Disclaimer

All Technical Service Bulletins for Synchronizer Hub: > < M/T - 4-3 Downshift/1-2 Upshift Gear Clash