Tracker 2WD L4-2.0L VIN C (1999)
Windshield Washer Hose: Service and Repair
Washer Hose Replacement - Rear (#2)
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Remove the spare tire and wheel assembly from the spare wheel carrier.
3. Gently pull the rear window washer nozzle (1) from the rear window washer nozzle mounting hole (3) below the rear door window.
4. Disconnect the rear window washer nozzle hose (2) from the rear window washer nozzle (1).
5. Remove the right quarter lower rear trim panel.
6. Remove the rear window washer nozzle hose (3) from the rear window washer nozzle hose connector (2) in the right rear quarter of the vehicle
near the rear door wiring harness grommet.
7. Remove the rear window washer nozzle hose (3) from the vehicle.
INSTALLATION PROCEDURE