Tracker 2WD L4-2.0L VIN C (1999)
1. Connect the windshield wiper motor linkage (1) to the windshield wiper motor crank arm (2).
NOTE: Refer to Fastener Notice In Cautions and Notices.
2. Install the windshield wiper motor (2) to the bulkhead. Secure the wiper motor with the 4 mounting bolts (1).
Tighten
Tighten the windshield wiper motor mounting bolts to 20 N.m (15 lb ft).
3. Connect the windshield wiper motor electrical connector (3).