Tracker 2WD L4-2.0L VIN C (1999)
Wiper Motor Linkage: Service and Repair
REMOVAL PROCEDURE
1. Remove the windshield wiper arms.
2. Remove the air inlet screen.
3. Remove the 2 bolts and the bulkhead center cover (2), exposing the windshield wiper motor linkage.
4. Remove the 5 retaining nuts (1) which secure the windshield wiper motor linkage (3) to the bulkhead (2).
5. Remove the windshield wiper motor.
6. Release the windshield wiper motor linkage retaining tabs (2).
7. Remove the windshield wiper motor linkage (1) by sliding the linkage through the windshield wiper motor opening.
INSTALLATION PROCEDURE