Tracker 4WD L4-1.6L VIN 6 (1998)
6. Remove the door lock cylinder lock rod (6) from the door lock cylinder (11).
7. Remove the 2 nuts and the front side door outside handle (10) from the door.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Cautions and Notices.
1. Install the front side door outside handle (10) to the door. Secure the front side door outside handle (10) with the 2 nuts.
Tighten
Tighten the front side door outside handle nuts to 10 Nm (89 lb in).
2. Install the front side door outside handle rod (2) to the handle. Secure the rod (2) with the front side door outside handle rod retainer.
3. Install the door lock cylinder lock rod to the door lock cylinder.