Tracker 4WD L4-1.6L VIN 6 (1998)
Ash Tray: Service and Repair
REMOVAL PROCEDURE
1. Remove the center trim bezel from the vehicle.
2. Remove the ashtray guide from the panel.
3. Remove the screw and the ashtray illumination lamp, if needed.
4. Twist off the ashtray illumination bulb socket from the lamp, if needed.
INSTALLATION PROCEDURE
1. Install the ashtray illumination bulb socket to the lamp by twisting the socket clockwise, if removed.
2. Install the ashtray illumination lamp to the panel, if removed. Secure the ashtray illumination lamp with the screw.
3. Install the ashtray guide to the panel.
4. Install the center trim bezel to the vehicle.