Tracker 4WD L4-1.6L VIN 6 (1998)
other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint
clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these
instructions can help you avoid damage to parts and systems.
IMPORTANT: Verify proper installation of the brake solenoid valve connectors on the correct brake solenoid valve.
5. Install the brake solenoid valve electrical connector onto the brake solenoid valve.
6. Bleed the brake modulator/motor pack assembly.
7. Perform the Diagnostic System Check.
