Tracker 4WD L4-1.6L VIN 6 (1998)
Brake Warning Indicator: Description and Operation
The BRAKE indicator is located in the instrument cluster. The BRAKE indicator will illuminate in order to warn the driver of conditions in the brake
system (base braking) which may result in reduced braking capability. It will also illuminate when the parking brake is applied or not fully released. The
following conditions will turn on the BRAKE indicator:
1. The parking brake is not fully released. If the parking brake is applied or the lever is not fully released, the switch on the parking brake lever
assembly will ground the BRAKE indicator circuit and cause it to illuminate.
2. The brake fluid level is low. If the brake fluid level drops in the master cylinder reservoir, the fluid level sensor will ground the BRAKE indicator
circuit, causing the BRAKE indicator to illuminate.
3. During engine cranking the BRAKE indicator remains on. This notifies the driver that the warning circuit is operating properly.
IMPORTANT:
-
The illumination of the BRAKE indicator may indicate reduced braking ability.
-
If the BRAKE indicator lights, the brake fluid level is normal and the parking brake circuit is functioning properly, then a malfunction with the
braking system exists. Refer to Diagnosis.
-
On vehicles equipped with Antilock Brake System (ABS), the BRAKE indicator will also alert the driver if an ABS malfunction has affected the
base brake system operation. For diagnosis of the ABS, refer to Antilock Brake System.
ABS and ABS Active
For more information regarding ABS and ABS ACTIVE indicators, refer to Indicator Lamp Operation.
Brake Fluid Level Switch
For more information regarding the brake fluid level switch, refer to Fluid Level Sensor, Bakes in Hydraulic System.
