Tracker 4WD L4-1.6L VIN 6 (1998)
9. Measure the lining thickness using J26900-7.If the thickness of the lining is less than 3 mm (0.12 in), replace the brake shoes (1). (Always replace
brake shoes in axle sets.)
INSTALLATION PROCEDURE
IMPORTANT: Apply Lubricate white lithium grease, or equivalent, to all brake component metal contact points (where the brake shoe metal contacts
the backing plate, the wheel cylinder and the adjustment strut, etc.) prior to installation.
1. Install the parking brake shoe lever (2) to the brake shoe (3).
2. Connect the parking brake cable to the parking brake shoe lever (1).
3. Install the lower shoe return spring (2) and the brake shoes.