Tracker 4WD L4-1.6L VIN 6 (1998)
Brake Master Cylinder: Service and Repair
Master Cylinder Bench Bleeding
1. Fill the reservoir with brake fluid and keep full throughout the entire bleeding process.
2. Install adapters into each master cylinder outlet port.
3. Attach a piece of plastic tubing to each adapter and submerge the other ends in the reservoir. Make sure the tubes remain submerged in the fluid.
4. Using a wooden or plastic dowel, slowly push in the master cylinder piston and release. Repeat the process until there is no sign of air (bubbles) in
the brake fluid.
