Tracker 4WD L4-1.6L VIN 6 (1998)
2. Install the parking brake cable (1) and grommet (2) to the floor (3).
3. Install the parking brake cable (3) to the backing plate (1).
4. Secure the cable (3) to the backing plate (1) with the cable stopper ring (2).
5. Install the parking brake cable to the parking brake shoe lever.
6. Install the drum and the linings.
7. Install the rear wheel and tire assemblies.
8. Lower the vehicle.
9. Install the parking brake cable to the equalizer.
10. Install the equalizer to the connecting rod.
11. Secure the equalizer to the connecting rod with the spacer and the locknut. Do not tighten fully.
12. Adjust the parking brake.
13. Install the parking brake lever cover to the vehicle.
14. Secure the parking brake lever cover to the vehicle with the two screws and the two clips.
