Tracker 4WD L4-1.6L VIN 6 (1998)
Parking Brake Lever: Service and Repair
Park Brake Lever Replacement
REMOVAL PROCEDURE
CAUTION: Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position.
1. Remove the negative battery cable.
2. Remove the following components from the vehicle:
-
The two screws
-
The two plastic clips
-
The parking brake lever cover (1)
3. Remove the parking brake switch electrical connector.
4. Remove the parking brake cable locknut (7) and spacer (8).