Tracker 4WD L4-1.6L VIN 6 (1998)
Cruise Control Servo Cable: Service and Repair
REMOVAL PROCEDURE
1. Remove the cruise control actuator assembly cover.
2. Loosen the cruise control cable locknut (4).
3. Remove the cruise control cable from the cruise control actuator lever (2).
4. Remove the cruise control cable (1) from the underhood guide clips.
5. Remove the cruise control cable (1) from the cruise control bellcrank above the accelerator pedal.
6. Unclip the cruise control cable (1) from underneath the panel in order to remove the cruise control cable from the vehicle.
7. Inspect the cruise control cable (1) for any fraying or excessive wear.
Replace the cruise control cable as needed.
INSTALLATION PROCEDURE