Tracker 4WD L4-1.6L VIN 6 (1998)
Coolant Line/Hose: Service and Repair
Coolant Bypass Hose Replacement
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Start the engine.
3. Operate the engine for 15 minutes.
4. Stop the engine.
5. Open the drain plug (3) on the radiator in order to drain the coolant into a container.
6. Loosen and reposition one hose clamp (1) at the intake manifold end and one hose clamp (1) at the coolant intake pipe end of the coolant bypass
hose.
7. Remove the coolant bypass hose from the vehicle.
INSTALLATION PROCEDURE
1. Position a new hose clamp (1) on each end of the coolant bypass hose.