Tracker 4WD L4-1.6L VIN 6 (1998)
32. Remove the nine exhaust manifold nuts (1).
33. Remove the exhaust manifold (2) with the gasket (1) from the cylinder head.
34. Remove the engine hanger (3) from the cylinder head.
35. Loosen the upper and lower A/C compressor mounting bolts (if equipped).
36. Loosen the upper and lower power steering pump mount bolts.
37. Remove the A/C compressor (if equipped) and/or power steering drive belt from the pulleys.
38. Loosen the upper and lower generator mounting bolts.
39. Remove the generator/coolant pump drive belt from the pulleys.
40. Remove four nuts, the cooling fan and the coolant pump pulley from the coolant pump.
^
Four nuts
^
The cooling fan
^
The coolant pump pulley
41. Raise and support the vehicle.
42. Remove four bolts and the front skid plate from the vehicle (if equipped).
43. Remove the two radiator shroud bolts.
44. Lower the vehicle.
45. Remove two bolts from the A/C suction line brackets at the right side of the radiator core support (if equipped).
46. Reposition the suction line for the radiator shroud removal access.
