Tracker 4WD L4-1.6L VIN 6 (1998)
16. Using a J 41040 in order to hold the camshaft timing belt gear (1) stationary, install the camshaft timing belt gear onto the camshaft. Secure the
camshaft timing belt gear with a bolt.
^
Tighten the camshaft timing belt gear bolt to 60 Nm (44 ft. lbs.).
17. Install the timing belt to the engine.
18. Apply GM P/N 12346240 or the equivalent to the surface of the distributor case that mates with the rear of the rocker arm shaft (2).
19. Install the distributor case (1) to the cylinder head. Secure the distributor case with three bolts.
^
Tighten the distributor case bolts to 10 Nm (89 inch lbs.).
20. Install the distributor into the distributor case.
21. Adjust the valve leash.
22. Install the cylinder head cover onto the cylinder head.
23. Install the radiator into the radiator core support.
24. Install the front end panel (1) to the vehicle. Secure the front end panel with the twelve bolts.
^
Tighten the front end panel bolts to 10 Nm (89 inch lbs.).
25. Install the two electrical connectors to the horn.
26. Install the hood latch to the front end panel. Secure the hood latch with two bolts.
