Tracker 4WD L4-1.6L VIN 6 (1998)
Intake Manifold: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Release the fuel pressure.
3. Remove the fuel filter cap in order to release the fuel vapor pressure in the fuel tank. After releasing the pressure, replace the cap.
4. Remove the air intake pipe from the Air Cleaner (ACL) intake hose and throttle hose.
5. Drain the cooling system.
6. Remove the three bolts and the throttle cover from the intake manifold (4).
7. Disconnect the accelerator cable (3) and kickdown cable (4) (automatic transmission equipped vehicles) from the throttle body bellcrank (1).
8. Remove the following from the throttle body:
^
One bolt
^
One nut
^
One screw
^
The accelerator cable bracket (2)
