Tracker 4WD L4-1.6L VIN 6 (1998)
12. Install the fuel feed hose at the fuel feed hose union (2).
13. Install the coolant hoses to the fast idle air valve below the throttle body.
14. Install the IAC air hose to the IAC valve.
15. Install the coolant hose to the IAC valve. Install the following vacuum hoses:
^
EGR pressure transducer
^
EGR valve
^
Brake booster supply hose
^
Vacuum modulator supply hose (automatic transmission equipped vehicles)
^
EVAP canister purge valve
^
Manifold Absolute Pressure (MAP) Sensor hose from the sensor
16. Install the following connectors:
^
Engine ground wire (7) from intake surge tank
^
Wiring harness from retaining clamps
^
Fuel injectors
^
EGR solenoid vacuum valve (1)
^
EGR by-pass valve
^
EGR temperature sensor
^
Evaporative emission canister purge valve
^
A/C ECT switch (3) (A/C equipped vehicles only)
^
ECT sensor sending unit
^
Engine Coolant Temperature (ECT) Sensor (4)
^
Idle Air Control (IAC) Valve
^
Throttle Position (TP) Sensor
17. Install the accelerator cable (3) and kickdown cable (4) (automatic transmission equipped vehicles) to the throttle body bellcrank (1).
^
Adjust the accelerator cable as necessary.
^
Adjust the kickdown cable (automatic transmission equipped vehicles) as necessary.
