Tracker 4WD L4-1.6L VIN 6 (1998)
Water Pump: Service and Repair
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Open the drain plug (3). Drain the coolant into a container.
3. Close the drain plug (3).
4. Remove the two bolts securing the A/C flexible hose to the radiator (if equipped). Reposition the hose to the rear.
5. Remove the four bolts that secure the shroud (1) to the radiator (4).
6. Remove the four fan clutch mounting bolts.
7. Remove the shroud, the fan clutch (4), and the cooling fan (3) together.
8. Remove the coolant pump pulley (1) from the coolant pump shaft. Disengage the generator/coolant pump drive belt (2) as the pulley is removed.
