Tracker 4WD L4-1.6L VIN 6 (1998)
Muffler: Service and Repair
REMOVAL PROCEDURE
1. Raise the vehicle. Support the vehicle.
2. Remove the following from the Front Pipe/Three-Way Catalytic Converter (TWC) (2) assembly:
^
The two bolts
^
The two nuts
^
The muffler/tail pipe assembly (1)
3. Remove one bolt and hanger from the pipe at the muffler (8-2 door), (7-4 door).
4. Remove one bolt and hanger from the muffler.
5. Remove two bolts and hangers (6) from the tail pipe.
6. Remove the muffler/tail pipe assembly from the vehicle.
7. Clean the seal mating surfaces.
INSTALLATION PROCEDURE
IMPORTANT: Install the muffler/tail pipe assembly hangers in their proper position.
