Tracker 4WD L4-1.6L VIN 6 (1998)
Blower Motor Resistor: Service and Repair
Remove or Disconnect
1. Negative (-) battery cable.
2. Pull I/P compartment out while pushing RH and LH stoppers in.
3. Blower motor resistor electrical connector.
4. One screw and blower motor resistor from blower case.
Install or Connect
1. Blower motor resistor to blower case, secure with one screw.
2. Blower motor resistor electrical connector.
3. Close I/P compartment.
4. Negative (-) battery cable.