Tracker 4WD L4-1.6L VIN 6 (1998)
Compressor Shaft Seal: Service and Repair
Tools Required:
J 33942-B-Compressor Shaft Seal Remover
J 34614-Compressor Shaft Seal Protector
Remove or Disconnect
1. Clutch assembly.
2. Oil felt and retainer from compressor drive shaft bore, using a flat screwdriver.
3. Key from drive shaft.
Removing Drive Shaft Snap Ring
4. Seal snap ring, using snap ring pliers.
5. Insert tool J 33942-B into seal.
6. Turn tool J 33942-B until making contact with seal notches.
Removing Drive Shaft Seal
7. Pull seal away from compressor. Discard seal.
Install or Connect
Installing Drive Shaft Seal Protector Tool