Tracker 4WD L4-1.6L VIN 6 (1998)
Tighten
^
Heater case bolts and nuts to 10 N.m (89 lb. in.).
2. A/C amplifier electrical jumper harness (if equipped with A/C).
3. Floor duct to heater case.
4. Antenna cable (if equipped with radio) and speedometer cable to retaining bracket.
5. Relay bracket; secure with two screws.
6. SDM bracket.
7. Evaporator (if equipped with A/C).
8. Right-side instrument panel center support; secure with two bolts.
9. Heater hoses and clamps to heater core.
10. Refill engine cooling system.
11. I/P.