Tracker 4WD L4-1.6L VIN 6 (1998)
1. Install new O-rings to refrigerant pipe fittings. Coat new O-rings with clean refrigerant oil.
2. Hose to vehicle; secure with compressor pipe fitting nut.
3. Compressor discharge hose at compressor fitting (one bolt).
Tighten
^
Compressor discharge hose fitting bolt to 9.8 N.m (86.74 lb. in.).
4. Negative (-) battery cable. Refer to Battery.
5. Evacuate and recharge air conditioning system.
6. Operate A/C system and check for refrigerant leaks.
