Tracker 4WD L4-1.6L VIN 6 (1998)
Install or Connect
1. Install new O-rings to refrigerant pipe fittings. Coat new O-rings with clean refrigerant oil.
2. Pipe to vehicle; secure at radiator-mounted guide bracket.
3. Pipe at condenser fitting in front of the radiator (one pipe nut).
4. Condenser-to-receiver/dryer (receiver/dryer inlet) pipe at receiver/dryer fitting (one bolt).
Tighten
^
Receiver/dryer pipe fitting bolt to 35 N.m (26 lb. ft.).
^
Condenser pipe nut to 35 N.m (26 lb. ft.).
5. Front grille and grille net.
6. Negative (-) battery cable.
7. Evacuate and recharge air conditioning system.
8. Operate A/C system and check for refrigerant leaks.
