Tracker 4WD L4-1.6L VIN 6 (1998)
Refrigerant Pressure Sensor / Switch: Service and Repair
Remove or Disconnect
1. Discharge and recover refrigerant.
2. Negative (-) battery cable. Refer to Battery.
3. A/C dual pressure switch electrical connector.
4. A/C dual pressure switch from receiver/dryer.
Install or Connect
1. A/C dual pressure switch to receiver/dryer.
Tighten
^
Dual pressure switch to 18 N.m (13 lb. ft.).
2. A/C dual pressure switch electrical connector.
3. Negative (-) battery cable. Refer to Battery..
4. Evacuate and recharge air conditioning system.
5. Operate A/C system and check for refrigerant leaks.