Tracker 4WD L4-1.6L VIN 6 (1998)
Audible Warning Device Control Module: Service and Repair
The audio alarm module mounts inside the panel, between the radio and the panel compartment.
REMOVAL PROCEDURE
1. Pull out the panel compartment while pushing the pane stoppers from both the left and right sides.
2. Disconnect the electrical connector from the audio alarm module (1).
3. Use a flat-bladed screwdriver in order to release the locking tab and remove the audio alarm module (1) from the bracket.
INSTALLATION PROCEDURE
1. Install the audio alarm module (1) to the panel bracket.
2. Connect the electrical connector to the audio alarm module (1).
3. Close the panel compartment.