Tracker 4WD L4-1.6L VIN 6 (1998)
Tachometer: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the cluster assembly from the panel.
3. Remove the cluster lens (7) and bezel (6) assembly from the cluster housing (3) by releasing the 8 black plastic tabs.
4. Remove the 3 screws (1) and the tachometer from the cluster housing.
INSTALLATION PROCEDURE
1. Install the tachometer gauge to the cluster housing. Secure the gauge with the 3 screws (1).
