Tracker 4WD L4-1.6L VIN 6 (1998)
Tail Lamp: Service and Repair
REMOVAL PROCEDURE
1. Remove the 2 screws which secure the tail lamp (1).
2. Pull the tail lamp (1) away from the rear end panel in order to gain access to the bulb sockets.
3. Disconnect the electrical connector (2).
4. Remove the 3 bulb sockets (1, 3, 4) from the tail lamp.
5. Remove the tail lamp from the vehicle.
6. Remove the bulbs from the sockets, if necessary.
INSTALLATION PROCEDURE