Tracker 4WD L4-1.6L VIN 6 (1998)
Drive Belt: Service and Repair
DRIVE BELT INSPECTION
1. Inspect the drive belt for cracks, cuts, wear and damage. Replace the belt if any cracks, cuts, wear or damage exist.
2. If any sections of the belt ribs are missing, replace the belt.
3. Inspect the belt for proper alignment on the pulleys.
4. If the drive belt is improperly aligned, align the drive belt.
POWER STEERING PUMP DRIVE BELT REMOVAL PROCEDURE
1. Loosen the power steering pump mounting bolts.
2. Pivot the power steering pump towards the engine in order to relieve the tension on the belt.
3. Remove the power steering pump drive belt (1) from the pulleys.
POWER STEERING PUMP DRIVE BELT INSTALLATION PROCEDURE