Tracker 4WD L4-1.6L VIN 6 (1998)
Coolant Line/Hose: Service and Repair
Radiator Pipe Replacement - Outlet
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Start the engine.
3. Operate the engine for 15 minutes.
4. Stop the engine.
5. Open the drain plug (3) on the radiator in order to drain the coolant.
6. Loosen and reposition the radiator outlet hose clamp (1) that secures the radiator outlet pipe (2) to the radiator outlet hose #1 (8).
7. Loosen and reposition radiator outlet hose clamp (1) that secures the radiator outlet pipe (2) to the radiator outlet hose #2 (3).
8. Remove one bolt and the radiator outlet pipe (2) from the vehicle.
INSTALLATION PROCEDURE
1. Position the new hose clamps (1) on the open ends of the radiator outlet hoses #1 (8) and #2 (3) before installing the radiator outlet pipe (2).