Tracker 4WD L4-1.6L VIN 6 (1998)
Coolant Line/Hose: Service and Repair
Coolant Pipe Replacement - Intake
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Start the engine.
3. Operate the engine for 15 minutes.
4. Stop the engine.
5. Open the drain plug (3) on the radiator in order to drain the coolant into a container.
6. Loosen and reposition the four hose clamps (1).
7. Remove the following hoses from the coolant intake pipe (5):
^
The two bypass hoses (6).
^
The radiator outlet hose #1 (8).
^
The heater core inlet hose (4).
8. Remove one bolt from the coolant intake pipe support. Remove the coolant intake pipe (5) from the vehicle.
9. Remove the O-ring from the coolant intake pipe (5).
INSTALLATION PROCEDURE
