Tracker 4WD L4-16L VIN 6 (1998) - Compressor Hose-to-Condenser Pipe (Compressor Discharge)
Install or Connect
1. Install new O-rings to refrigerant pipe fittings. Coat new O-rings with clean refrigerant oil.
2. Pipe to vehicle; secure with bracket and bolt.
3. Pipe at condenser inlet fitting (one bolt).
4. Compressor discharge hose at compressor fitting (one bolt).
Tighten
^
Condenser inlet pipe fitting bolt to 25 N.m (18 lb. ft.).
^
Compressor discharge hose bolt to 9.8 N.m (86.74 lb. in.).
5. Front grille and grille net.
6. Negative (-) battery cable.
7. Evacuate and recharge air conditioning system.
8. Operate A/C system and check for refrigerant leaks.