Tracker 4WD L4-1.6L VIN 6 (1998)
Install or Connect
1. Install new O-rings to refrigerant pipe fittings. Coat new O-rings with clean refrigerant oil.
2. Evaporator-to-compressor (compressor suction) pipe to vehicle; secure at radiator-mounted guide brackets with bolts.
3. Pipe at evaporator outlet bulkhead fitting (one pipe nut).
4. Pipe at compressor hose fitting (one nut).
Tighten
^
Evaporator outlet pipe nut to 45 N.m (33 lb. ft.).
5. EVAP canister to vehicle.
6. Negative (-) battery cable. Refer to Battery.
7. Evacuate and recharge air conditioning system.
8. Operate A/C system and check for refrigerant leaks.