Tracker 4WD L4-1.6L VIN 6 (1998)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Outlet (Hose 1)
REMOVAL PROCEDURE
1. Remove the radiator cap.
2. Start the engine.
3. Run the engine for 15 minutes.
4. Stop the engine.
5. Open the drain plug (3) on the radiator in order to drain the coolant.
6. Loosen and reposition the hose clamp (2) on the radiator outlet hose #1 (8) at the radiator.
7. Loosen and reposition the hose clamp on the radiator outlet hose #1 (8) at the radiator outlet pipe (2).
7. Remove the radiator outlet hose #1 (8).
INSTALLATION PROCEDURE
1. Position a new hose clamp (1) on each end of the new radiator outlet hose #1 (8).
