Tracker 4WD L4-1.6L VIN 6 (1998)
Fuel Injector: Service and Repair
Removal Procedure
1. Remove the Throttle Body.
2. Remove the Exhaust Gas Recirculation (EGR) pressure transducer (1) from the pressure transducer bracket (3).
3. Remove the two bolts (2) from the EGR pressure transducer bracket to the intake manifold.
4. Remove the EGR pressure transducer bracket (3) from the intake manifold.
5. Remove the two bolts (2) from the fuel pressure regulator to the fuel rail.
6. Remove the fuel pressure regulator (1) from the fuel rail.
7. Remove the fuel pulsation damper (1) from the fuel rail (2).
8. The fuel feed pipe from the fuel rail (2).