Tracker 4WD L4-1.6L VIN 6 (1998)
16. Disconnect the Throttle Position (TP) sensor electrical connector (2).
17. Remove the nut (1) from the accelerator cable bracket (5).
18. Remove the bolt (1) from the accelerator cable bracket.
19. Remove the screw from the accelerator cable bracket.
20. Remove the accelerator cable bracket from the throttle body.
21. Disconnect the Exhaust Gas Recirculation (EGR) solenoid vacuum valve vacuum hose from the throttle body.
22. Disconnect the two coolant hoses (3) from the throttle body.
23. Remove the nut from the throttle body to the intake manifold.
24. Remove the bolt from the throttle body to the intake manifold.
25. Remove the throttle body and gasket from intake manifold (4).
