Tracker 4WD L4-1.6L VIN 6 (1998)
Scrapping Procedures
During the course of a vehicle's useful life, you may need to dispose of a live (undeployed) inflator module. The following information covers the proper
procedures for disposing of a live inflator module. Before you dispose of a live inflator module, you must deploy the inflator module. Do not dispose of
live inflator modules through normal refuse channels.
CAUTION: In order to prevent accidental deployment of the air bag which could cause personal injury, do not dispose of an undeployed
inflator module as normal shop waste. The undeployed inflator module contains substances that could cause severe illness or personal injury if
the sealed container is damaged during disposal Use the following deployment procedures to safely dispose of an undeployed inflator module.
Failure to dispose of an inflator module as instructed may be a violation of federal, state, province, or local laws.
Do not deploy an air bag in the following situations:
^
If you replace an inflator module under warranty, you may need to return the inflator module, undeployed, to Delphi Interior & Lighting
Systems. Refer to the latest service bulletin regarding SIR shipping procedures.
^
If a vehicle is the subject of a Product Liability Report related to the SIR system and is subject to a Preliminary Investigation (GM-1241), do
not alter the SIR system in any manner. Refer to the latest service bulletin on SIR shipping procedures.
^
If a vehicle is involved in a campaign affecting the inflator modules, follow the instructions in the Campaign Service Bulletin for proper SIR
handling and shipping procedures.
Shipping Procedures For Live (Undeployed) Inflator Modules
Service personnel should refer to the latest Service Bulletins for proper SIR inflator module shipping procedures.
