Tracker 4WD L4-1.6L VIN 6 (1998)
Seat Belt Buckle: Service and Repair
Rear Seat Belt Buckle Replacement
2 Door
CAUTION: The seat belt assembly and/or bracket assembly must be replaced as a unit only. Do not substitute parts for any reason, or
personal injury could result.
CAUTION: Replace belts, retractors, and hardware in use during all but a minor collision. Also, restraint systems should be replaced and
anchorages properly repaired if they were in areas damaged by collision, whether the belt was in use or not. If there is any question, replace the
belt system. Damage, whether visible or not, could result in serious personal injury in the event of an accident.
Description
1. Fold the rear seatback.
2. Pull the rear seat release handle and raise the rear seat.
Description
3. Unclip the support rod from the bottom of the rear seat and the support seat.
4. Remove one rear anchor bolt from each rear seat hinge (1).
5. Lower the rear seat.
6. Gently pry the hinge cover (2) from each rear seat hinge (1).
